|05-27-2008 11:26 AM|
|05-27-2008 09:47 AM|
|05-27-2008 09:37 AM|
See note 5 on the bottom of page 1.
|05-26-2008 07:20 PM|
|Halogrinder||well tell me what it is, and ill tell you what mine is and we can see if they are the same. im gonna have to ditch this shit some how or another|
|05-26-2008 05:59 PM|
|05-26-2008 05:49 PM|
|Halogrinder||hey before you do that, take a pic of the ring gear w/ a tape measure. i have a set of 4.56 gears sitting here that arnt gonna be used. ill half that price|
|05-26-2008 05:45 PM|
|05-26-2008 05:41 PM|
|Halogrinder||hmm. i dont see anything in the ARB manual that states it needs different gears|
|05-26-2008 05:33 PM|
|05-26-2008 05:32 PM|
|Halogrinder||well if i can help, gimmie a yell.|
|05-26-2008 05:31 PM|
Yeah the original carrier is thicker where the bolts pass through(the reason I needed shorter bolts....)
Ill see if summit has gears...what a pain in the ass!!!!I wish I would have known.....I just didnt think 14 bolts had a carrier break like a dana axle.....
|05-26-2008 05:30 PM|
You can't use factory 4.56 ring gears on that carrier.
4.10 and down use a different carrier, but 99% of aftermarket gears for a 14FF are 'thick' cut past 4.56.
|05-26-2008 05:19 PM|
yea mang, i think you need either the 4.10 and down carrier or a 4.56 "thick" gear, from what i have gathered.
i have some 4.56's and the carrier if your interested. i also have some out of the 14 bolt in the cruiser, but havent popped the cover to see whats in there (i bought 5.13's).
|05-26-2008 05:13 PM|
Why dont they tell you you need shorter ring gear bolts???Plus I put it all together and I cant adjust it far enough to the pasengers side to have anything less than 1/4 inch backlash???the passengers adjuster is bottomed out!!!!
Heres what I have....14 bolt,4.56 factory gears...installing rd114
Am I missing parts???I followed the instructions... and read billavista's article on it...
it acts like it needs a ring gear spacer...or a thick ring gear???Anyone run into this???