Pirate 4x4 banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 25 Results
  1. Dodge
    This is my first time setting up a differential. All new bearings, same used gears. I’m installing a Yukon duragrip. Backlash is about .007 to .008 and I’m using setup bearings the same brand as the new ones. Pinion depth was not changed. How’s the pattern looking?
  2. General 4x4 Discussion
    Hi everyone, I have an 89 Chevy Silverado extended cab with brand new 49" irok tires and brand new 16.5" 8 lug Gm Bart wheels that I had centers welded in to have them widened to 18" wide ( 16.5 x 18 ) Then I powder coated the wheels and had the tires mounted on the wheels etc . Here's where...
  3. Chevy
    Ive wanted to solid axle swap my truck for a while its a 05 2500hd 4wd. This isnt asking if its a worthy change from ifs. I have acess to a complete 07 f450 dana super 60 axle for $300. From what i can tell ima have to shorten the axle to match rear track width, regear either my rear axle or...
  4. Axles/Tires/Wheels For Sale
    Dana Spicer P/N 2023612-1 $3500. Brand New Dana Spicer complete housing, locker, 4.88 gears, brakes. Set up for the rear of 07-18 Jeep JK. Chromoly 35 spline axle shafts, Eaton E locker, 1350 yoke, 69" hub to hub. 8x6.5 bolt pattern for early GM, Ford, Dodge wheels. Cut the JK brackets off and...
  5. Newbie General 4x4 Discussion
    Here's my situation. I have a radius arm truss on my Dana 60. I want to go to a 3 link instead. Could I potentially use the same truss? Just cut off the upper axle side brackets, and replace them with a single upper mount for the 3 link? Will the triangulation work with the lowers of the 3...
  6. Wanted!
    In search of a 78-79 ford dana 60. Anywhere near or around 500 miles from Tulsa Ok.
  7. Axles/Tires/Wheels For Sale
    All for super duty 60 05+ All thats left is: 4.88 gears for super duty $250 New Tmr truss $225 916-224-9606 text or calling is best
  8. Axles/Tires/Wheels For Sale
    6 Ford Dana 60 complete axles, all are factory 3.73. 4 axles are 2008-2010 (radius arm) super duty and 2 are 2002-2004 (leaf sprung) super duty. $350/each, shipping available.
  9. Vehicles and Trailers For Sale
    Hi all, Considering selling my 1998 2 door Tahoe SAS Dana 60 14 bolt ORD Doubler truck. No expense was spared when I built it. I bought the truck in Colorado in 2004 and started build. Original frame and body with 98k miles total. Dana 60 front axle. 1978 Ford F350 axle (big $$$) with...
  10. Axles/Tires/Wheels
    Hey y’all, I need some help with my 79 Ford Dana 60 front end. It’s mounted under a Jeep YJ which I’ve owned for a few months. I’ve been working my way through the systems & last weekend I pulled the hubs, spindles, & axles to install a locker up front. I was a little surprised there’s no seal...
  11. Axles/Tires/Wheels
    In efforts to put a 6 lug dana 60 under the rear of my SAS'd Libby it seems i bought the most odd ball Dana 60 out there. c-clip 6 lug semi float, 12 bolt cover, 33 spline shafts, and side adjusters... it seems they make 35 spline c clip lockers, so im thinking this dosn't change my plans much...
  12. General 4x4 Discussion
    Hi, Working on Dodge 2001 axle full rebuild. This is my first experience with Dana, never worked on axles with U-joints before. Successfully assembled the center, then passenger side, no issues encountered. Started to assemble the driver side, and once I put the driveshaft inside and bolt on...
  13. Jeep - Non Hardcore
    I know not too many people are still using Dana 60 rears, but I am. The axle came with 30 spline yukon chromoly's, and I bored the spindles out and upgraded to 35 spline chromoly shafts and this shows the shaft differences and the boring process. (78 f250 D60)
  14. Jeep - Hardcore Tech
    I just recently acquired a stock 2004 Jeep Wrangler Unlimited (LJ, non-Rubicon) for my project. This is not a daily driver. The biggest challenge I have so far is planning out how I might be able to accomplish this in more "bite-sized" steps towards the ultimate goal... rather than having a huge...
  15. Chevy
    Hello everyone, long time reader here and first time poster. Hopefully this is in the right section. In the past year I started redoing my first truck that I bought when I was 16 a 2002 Silverado 1500 sc/sb 4.3 5 speed 4x4. It all started as redoing the rocker panels and possibly finally...
  16. Vehicles and Trailers For Sale
    Selling a '63 CJ6. Body is in rough shape, so is the frame. However it runs, drives, and stops. Has manual brakes and steering, and the drive train is original. It has a clean title, and the VIN plate is intact on the firewall. Currently registered non-op. Pink slip in hand, which lists it...
  17. Axles/Tires/Wheels For Sale
    Great used chevy drw dana 60 hubs, with bearings, and like new 500mi. Cross drilled and slotted rotors, great newer studs, ready to run. I was running these with H1 wheels and tires and that ship has sailed so get these before they get surface rust on them. lol! Located in the SF Bay Area $750.00
  18. dana 60

    dana 60
  19. dana 60

    dana 60
1-20 of 25 Results
Top