Pirate 4x4 banner
1 - 3 of 3 Posts

·
Registered
Joined
·
73 Posts
Discussion Starter · #1 ·
Gotsa question on 1/4 Elliptic setups. I did a search and came up with lots of good info about which springs to get and where to get them but with no lift #'s. I saw alot about F250 Leafs but how much lift would you net with this spring. I know it depends on the lenght of shackle and suck but how about just for starters to work around. How much lift do they provide. By the way I have a 84 cherokee if that helps. Thankz

Tuck:confused:
 

·
Registered
Joined
·
27,885 Posts
mine are frenched into the bottom of the frame(flush) and give what is normally about a 4-5 inch normal leaf sprung lift on a toyota, my rear shackles are about 5" long and i have them mounted off the rear of the housing near 9-10 oclock(crossection)....i used the 4 leafs(no overload)for now, i need to wheel it to see how the spring rates match up front and rear...
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top