Pirate 4x4 banner
1 - 4 of 4 Posts

·
Registered
Joined
·
54,551 Posts
Discussion Starter · #1 ·
anybody out there running a fj40 full width w/dana 44 that uses a 4 wheel steering box and a steering arm on drivers side only. stock set up if it was under a chevy truck. <IMG SRC="smilies/fj.gif" border="0">
 

·
Registered
Joined
·
54,551 Posts
Discussion Starter · #3 ·
push pull steering that's exactly it i don't nessecarly want to run it want to know if it's an option. i've heard of doing hysteer with a steering arm on both knuckles and heard of running a steering arm on pass. side only and leaving the tie rod in the stock position. ws wondering if the push pull would work and has any tried this and suceeded or is this a failure from the start.:fj:
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top