[puma]

What is a chevy d -60 front and 14 bolt matching rear worth.$$$$$????

 

[Home Built]

about 1000 for the 60 and 150 for the 14bolt.
that's what I have seen them going for around here..
If it's the ball joint 60 then a little less, the king pin style is more desirable.

 

[tie6044]

That's about the average, unless they have a locker or lower gears.

 

[mbryson]

about 1000 for the 60 and 150 for the 14bolt.
that's what I have seen them going for around here..
If it's the ball joint 60 then a little less, the king pin style is more desirable.

There's Chev ball joint 60s??????

 

[c_deezy]

Where do you guys find 14 bolts for $150? Around here they must be made of gold because everybody wants $600-700 at least.

 

[mbryson]

Where do you guys find 14 bolts for $150? Around here they must be made of gold because everybody wants $600-700 at least.

Ummmm.......almost everywhere around here.

 

[blacksheep10]

Where do you guys find 14 bolts for $150? Around here they must be made of gold because everybody wants $600-700 at least.

you need to update your user cp so I know where you live. I will load up about 30 of them on the gooseneck and make a trek to wherever that is. Looks like I could make a fortune :laughing:

 

[Home Built]

There's Chev ball joint 60s??????

Not that I am aware of, those are Ford, but some people like them.
I was just giving a general answer. :shaking:
I am with Blacksheep10, I can take about 6 or 7 where you are, I would love to make some extra money on those 14 bolts....

 

[Greatlakeoffroad]

MI, IN, IL, OH, KY, TN, PA, That's were I've bought them for $75-$150 typically 4.10's and a gov lock.

Where do you guys find 14 bolts for $150? Around here they must be made of gold because everybody wants $600-700 at least.

 

[justscoutin]

what if its a brand new military d60 with the 4.56 gears and locker? never been used, how much are those worth?

 

[Home Built]

Most of the ones I have seen were in the 2,400 to 2,800 range.
I did not see these private party, but places like surpluss yards and such.
The same places that think a 14 bolt is work 800 bucks with a open 4.11 gearset inside.

 

[1981k20]

Up here I found a D60 for $250 and a 14B for $50. A friend of mine just bought an old Chevy 1 ton SRW for $500, complete. Depends on how hard you look. Try to find junk yards that are 3-4 hours away from any city.

 

[bansheeman1]

I just seen a set on ebay for 500

 

[puma]

I just put a toy motor in for some guy, and he gave me a running 83 1 ton 4wd chevy for it!! it has a 454 and a th 400.

just trying to figure out what to do with it.

 

[Home Built]

Shiat...... that's an easy one...
Lift it lock it and wheel the piss out of it.... :flipoff2: