Pirate 4x4 banner

1 - 20 of 29 Posts

·
Premium Member
Joined
·
6,069 Posts
Discussion Starter #1
1987 GMC Short Wide bed 4x4 with a 350 TBI/700r4/208 transfercase. The axles are 10 bolts with 3.73's in the axles.

I bought it to use the engine etc. for a swap. That is not going to happen now.

The truck has been rolled and the body is not good. He was driving it daily when he rolled it. Honestly, there are no useable body parts at all.

It runs decently and can be driven onto a trailer etc. I have been driving it around my yard about once a month to keep things moving.

It is complete minus the locking hubs.

Location: Chiloquin Oregon-about one hour into Oregon.

Price: $700 in cash

Trades: Maybe. I can use good quality Jeep CJ parts or projects, 15" tires starting at 33" and bigger. I would consider other things as well.

Delivery: Maybe, if reasonably local.

Pics: I can do pics if needed to make a sale.
 

·
Premium Member
Joined
·
6,069 Posts
Discussion Starter #2
Price is a big OBO. I live on hour from the CA border on the OR side.

Truck runs good and you can see that.

Part trades considered along with cash etc.

You don't need to piece together a TBI system, just buy the truck.

ROB
 

·
Premium Member
Joined
·
6,069 Posts
Discussion Starter #5
OK. How about $600.

OR $300 and a partial trade.

I can use some Dana 44 HS parts or a centered Waggy Dana 44. Other things as well.

Thanks, ROB
 

·
Premium Member
Joined
·
6,069 Posts
Discussion Starter #9
Pics sent. It is a drivetrain donor so don't plan on using the body parts. The rest is complete and useable.

ROB
 

·
Premium Member
Joined
·
6,069 Posts
Discussion Starter #10
Bump. Really need to make it a local sale. It isn't worth the fuel to haul out of the area via a trucking company.

ROB
 

·
Registered
Joined
·
1,383 Posts
too bad its so far .. i dont have a way to get it and i could use the running gear :(
 

·
Premium Member
Joined
·
6,069 Posts
Discussion Starter #13
I can deliver reasonably local. My tow rig is the largest obstacle. It works, and I'd go a few hours out but I don't think I'd dare get more than a couple of hours away due to the age and miles on it.

Local use only kinda deal.

Trades for 36-38" tires of the 15" variety.

Thank you, ROB
 

·
Premium Member
Joined
·
6,069 Posts
Discussion Starter #14
OK. How about $500 firm.

Or part trades for 68-73 Datsun 510 project cars or parts. 2-doors preferred naturally..

I just drove it yesterday around the yard.

Can likely deliver if local.

Thank you, ROB
 

·
Premium Member
Joined
·
6,069 Posts
Discussion Starter #15
$500 should be fair.

It has all the conversion stuff for putting an EFI engine in another rig.

I just don't need it, and I am not even a GM guy.

ROB
 
1 - 20 of 29 Posts
Top