[86Project]

Everything will work but you will have to change the fuel pump

Easiest way is to just get the tank off of the regular one. The reason being is the MPI always keeps a prime, if you have a Chilton or a Hanes just read about changing a fuel filter. Also your current fuel pump only puts around 6psi out under load where the MPI needs at least 19psi. Just can't be done with your current one.

 

[86Project]

Fuel rail

Not exactly sure but it has something to do with the fuel rail, I can find out, as a matter of fact I will and get back to you on it.

 

[86Project]

With the fuel rail it has to have gas at the top of the injectors in order to not allow air into the system with MPI it is very important to not allow air in, I can find out more if you need. Trevor