Pirate 4x4 banner
1 - 5 of 5 Posts

·
Registered
Joined
·
2,920 Posts
Originally posted by 76Levi5:
<STRONG>I don't know if he's a member of POR or not, but this guy Chris mated an NP203 and a Bronco Dana20 in his YJ.

Check it out</STRONG>

Its called the Super Creeper. The 203 replaces the adapter between the 435 and the 20. It adds 7/8 inches to the tranny/tcase, so you dont lose much of your rear dline. Its a kit that wildhorses sells

209-943-0991 (wildhorses # if you have any quesitons about it)
 

·
Registered
Joined
·
111 Posts
Actually, it isn't. <IMG SRC="smilies/tongue.gif" border="0">
I built that setup myself, from scratch. The adaptors started life as scrap chunks of aluminum and steel, and Moser modded the shafts for me based on drawings I sent them.

Wild Horses does make a kit that does the same thing, but I've got better things to do with the kind of coin they want for it. Besides, mine's set up exactly the way I want. No compromises.

Chris
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top