Pirate 4x4 banner

20R vs. 22R Flywheel

3078 Views 3 Replies 4 Participants Last post by  Chad
I'm building a 22R block with a 20R head on it for my '80 truck and need to know if there are any differences in flywheels from these motors? I'm assuming my little starter will need to be replaced with one from a later model (gear reduction=higher torque) since the motor will be higher compression than a stock 20R or 22R. Thanks for your time.

1 - 1 of 4 Posts
You might want to contact LC Engineering. They make many motors like what you are seeking and they could answer that question.

1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.