Pirate 4x4 banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,094 Posts
I had this same problem. It was my Idle Cutoff silenoid. This drove my frigin crazy. There is an excellent write up on this somewhare around here with good pics. But in short if standing on the passenger side and looking at the carb you will see 3 or 4 wires running to it, a RED (power to choke) and a Black and white(these are the Power/Ground to your Idle Cutoff silenoid). All I did was put 12v(either to ACC Switch or toggle) to the white wire and a constant ground to black and pow the thing would idle like a dream and my miss went away. I am seeing this more and more as the 22r emission computers are getting older and not supplyin the power to the switch.(have done it now to 2 of my friends trucks).

Hope this helps. Try a search under idle and silenoid I think thats how I found it.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top