Pirate 4x4 banner
1 - 2 of 2 Posts

· Lets Ride
Joined
·
349 Posts
you can try this, sorry if its just the basics



and you have spark...
and your sure the dissy is in the right location?
Pull your #1 plug, put your finger over the hole, have someone bump the starter turning the motor over untill the compression blows your finger off. your at TDC, or close,
check timming mark, looks good?

I dont think your chain could be to far off.


turn motor to TDC, put dissy back in with rotor pointing to #1. and the housing back is in the right location from when you pulled it?

double check your plug wires for firing order.

Rick
 

· Lets Ride
Joined
·
349 Posts
i dont know what smoke out of the dissy means, but it is not good.

I don t think there are any short cuts to checking the timming chain marks,

I think you problem lies somewhere other than your timming chain....

Rick
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top