Pirate 4x4 banner
1 - 2 of 2 Posts

·
Registered
Joined
·
70 Posts
You won't know the difference behind the wheel. I say build whatever id easier for you. If it's a 3-link I would use a 1.25" heim at the top of the rear axle and bushings at the front of the upper link. The lowers depend on where you're mounting the coil-overs or coils. If they're going to be on the axle then I think anything over 3/4" would probably be fine for your application. If the coil-over or coils are on the lower link then would use 1.25" at the axle and large bushings up front.
 

·
Registered
Joined
·
70 Posts
If the coils are going to be on the axle then I think a 1.25" heim on the lower link is overkill. Otherwise your plans sound good to me.
 
1 - 2 of 2 Posts
Top