Pirate 4x4 banner
1 - 3 of 3 Posts

·
Registered
Joined
·
4,050 Posts
Discussion Starter · #1 ·
ok - its time to do the rear susp. on my truggy project - i was going to go with a 3 link - with 4 foot long lower arms and a 3 foot upper wishbone - i cant afford coil overs so i was thinking 2.5 EB superflex coils - but i noticed everyone is going with the 4 link - is the flex better ? travel ?

also is 1 1/4 heims overkill for this ? all the links are going to be 2" DOM .250 - i just bought 20' of the DOM and was going to start mock up tomorrow - any sugestions



its a 78 150 with 44s - pics are on here - will post some more soon - :flipoff2:
 

·
Registered
Joined
·
4,050 Posts
Discussion Starter · #3 ·
---

I was going to use poly bushings on the upper wishbone and a 1.25 heim with some misalignment spacers - lower links were going to have 1.25 at the axle and some polys at the frame - is this a good idea ? or should the lower links have heims at both ends ? the coils will be on the axle / truss :smokin:
 

·
Registered
Joined
·
4,050 Posts
Discussion Starter · #7 ·
ok so 3 link it is

- should the lower arms have heims at both ends ? i was oing to put polys up front and heims in back - will this flex ok ??:D
 
1 - 3 of 3 Posts
Top