Pirate 4x4 banner

4.3 Chevy Into 86 Runner Q.s

887 views 8 replies 7 participants last post by  soljahca 
#1 ·
Allright Im thinking about putting this 1995 4.3 chevy into my runner and I got some questions about it. I did a search and it came up with so much info I just thought this would be easier...

1.will the 86. toyota fuel pump pressure work with the 4.3

2.how much wiring is involved splicing it into toyota harness

3.will the smog parts work with toyota, evap. lines to gas tank etc.

4.putting the chevy to toyota fuel lines/filter together

any other key points I need to consider would be cool or if there is already a thread on this stuff hook it up

thanks
 
#6 ·
Ask Crash

Originally Posted by soljahca
Allright Im thinking about putting this 1995 4.3 chevy into my runner and I got some questions about it. I did a search and it came up with so much info I just thought this would be easier...

1.will the 86. toyota fuel pump pressure work with the 4.3

2.how much wiring is involved splicing it into toyota harness

3.will the smog parts work with toyota, evap. lines to gas tank etc.

4.putting the chevy to toyota fuel lines/filter together

any other key points I need to consider would be cool or if there is already a thread on this stuff hook it up

thanks


1. Fuel Pump will work if its not TBI. If its TBI, use the right reg..

2. Wiring is a snap, unless if you hang out here (pirate4x4) too long.

3. What smog parts ? They should be included in the donor 4.3

4. Use the Chevy fuel stuff and your pickup.

5. Don't forget the the VSS if your going to smog it (CA).

6. After all that, no big deal. 5-10 wires and your on the road, killing 3.4's everywhere! ^&&^%%$@#!@@#%^&*(*()
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top