Pirate 4x4 banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3,501 Posts
Discussion Starter #1
Anyone using 48" rears up front with the Rancho 60622 AAL?? I heard this was a good setup for 3-4" lift. Also moves the axle 2" forward. <IMG SRC="smilies/usa.gif" border="0">
 

·
Registered
Joined
·
12,164 Posts
CLICK
check out DRM`s site it has some
info on the rear spring to front swap

[ 09-30-2001: Message edited by: Richard ]
 

·
Registered
Joined
·
1,988 Posts
I just did my SAS with 48" toy rears, added a couple old front leafs and removed the overloads, but what's the Rancho AAL ? Definately good firewall clearance for my 35 SX's, could run 38's with no problem. I'm setting probably 6-8" above stock and the springs are barely arched. I set it up different from stock though, rear hangers front shackles.
 

·
Registered
Joined
·
3,501 Posts
Discussion Starter #4
Originally posted by Richard:
<STRONG>CLICK
check out DRM`s site it has some
info on the rear spring to front swap
</STRONG>
Dave's site has some info but not what I'm looking for.
 

·
Registered
Joined
·
460 Posts
E-mail "overeasy", [email protected] , he is running a custom setup with the 48"ers up front. He's got about 4" of lift and is getting 19"-20" out of them. I think he might be going 44044, so maybe you can pick his packs up from him for a good deal. <IMG SRC="smilies/biggrin.gif" border="0">

[ 09-30-2001: Message edited by: GRABBER ]
 
1 - 5 of 5 Posts
Top