Pirate 4x4 banner
1 - 1 of 1 Posts

·
Registered
Joined
·
597 Posts
if it has the 6bolt spindle you can use the stock eb knuckle. and a large bearing gm spindle/hub rotor

if it has 297 joints use the gm outer shaft if it has a 260 shaft remove .070 from the inner hub gear and use the stock eb outer shaft.

i have done the latter on a friends eb but used 8 lug hub/rotors to match the 60 he put in the rear until he could find a front 60.
 
1 - 1 of 1 Posts
Top