Pirate 4x4 banner
1 - 11 of 11 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Does any one know how far forward I should move the front spring mount when using the 62" Chevy 1/2-tons in the rear? I'm using Jeep Wrangler mounts and I've come up with a couple different measurments and I'm not quite sure where my axle will end up. <IMG SRC="smilies/idea.gif" border="0">
 

·
Registered
Joined
·
2,252 Posts
I don't think anyone here has done that swap.

You may want to try another board. <IMG SRC="smilies/thefinger.gif" border="0">

or do a "search".

nevermind,

search doesn't bring anything up.

I moved mine 11.25 inches forward CE to CE. The springs were 63" long. 11.5 would center it.

[ 11-03-2001: Message edited by: Yarddog ]

[ 11-03-2001: Message edited by: Yarddog ]
 

·
Wicked Raciest !
Joined
·
17,737 Posts
Originally posted by Erik G:
<STRONG>Does any one know how far forward I should move the front spring mount when using the 62" Chevy 1/2-tons in the rear? I'm using Jeep Wrangler mounts and I've come up with a couple different measurments and I'm not quite sure where my axle will end up. <IMG SRC="smilies/idea.gif" border="0"></STRONG>
What year rig are you talking about?? That also makes a difference.
<IMG SRC="smilies/usa.gif" border="0"> <IMG SRC="smilies/usa.gif" border="0">
 

·
Registered
Joined
·
1,329 Posts
I did them on my 84 ex cab ..move them mount right under the farthest farward bed mount post.
 

·
Registered
Joined
·
34,264 Posts
I won't even go there, Grrrrrrrrrrrrrrrrr read my sig, and welcome from OROVILLE NewBie <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"> <IMG width=320 height=240 SRC="http://www.pirate4x4.com/ubb/uploads/63 chevy hanger.JPG">.......................11"
 

·
Registered
Joined
·
34,264 Posts
Originally posted by GRABBER:
<STRONG>Are you sure Wrench, thats 11", right? I'm glad you posted I didnt believe SeaBass. <IMG SRC="smilies/rolleyes.gif" border="0"> <IMG SRC="smilies/tongue.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"></STRONG>
BaHaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
<IMG SRC="smilies/rasta.gif" border="0"> <IMG SRC="smilies/rasta.gif" border="0">
 

·
Registered
Joined
·
1,329 Posts
11 inches for sure
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top