Pirate 4x4 banner
1 - 9 of 9 Posts

·
Registered
Joined
·
3,010 Posts
i haven't heard anything about that.

i guess the best thing to do is see where the springs put the center of your axel and measure and put you spring mounts where it is center. you may have to move you shakles back as well?

sorry man!
 

·
Registered
Joined
·
460 Posts
Discussion Starter · #5 ·
Thanks guys. <IMG SRC="smilies/smile.gif" border="0"> But is anybody running this setup? I would just like a confirmation on my measurements. I'm also going to use a 8" single shackle in the rear. It looks as if this will all work. (spring mount 9.5" forward of origingal mount eye to eye, with a 8" shackle from the stock shackle mount.)
Any suggestion would be appreciated. <IMG SRC="smilies/smile.gif" border="0">
 

·
Registered
Joined
·
460 Posts
Discussion Starter · #9 ·
Originally posted by jonny spotweld:
<STRONG>I've got the chevys on a '90 and I put the front hanger 8" forward. This moved the axle back 1/2" so it was centered in the wheel well. Right now I have a 6" shakle on the back, soon to be replaced with a double shakle.

CJ</STRONG>
So you put the hanger 8" forward eye to eye, right?

<IMG SRC="smilies/smile.gif" border="0">
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top