Pirate 4x4 banner

1 - 4 of 4 Posts

·
Registered
Joined
·
569 Posts
Discussion Starter #1
got a 351w bored and stroked to a 427. short block built by RPM in mt. juliet with moly 4340 crank, eagle H beam rods, forged pistons, and girdle. has procomp 200cc/72cc aluminum heads with a rocker girdle. kevko 8qt pan. 11.2 to 1 compression. rest of motor accessibled by mcmahann machine. comes with MASS FLOW fuel injection, fuel pump, regulator. everything needed to run. estimated by machine shop in the 650hp range. ran it in my EOR buggy up until i sold the buggy.

8500 for motor and mass flow
also, have a couple of built C6s if someone is interested.
located in murfreesboro, tn
 

·
Registered
Joined
·
569 Posts
Discussion Starter #4
no thanks on the trade. not really into racing wheelers
 
1 - 4 of 4 Posts
Top