Pirate 4x4 banner
1 - 1 of 1 Posts

·
Registered
Joined
·
299 Posts
I've seen at least one here on P4x4 where they adapted 1/2 ton Chevy calipers to work. It was most likely on a 60, but the brakes are the same between the two.

Not sure if it was a kit or if it was homebrew though.
yes and only and idiot would run 15 inch rims and put chevy calipers on the front of their fullsize ford. :flipoff2:

most auto part stores sell remans and new calipers. new ones are usually pricier though. alot of the reman ones are funky . you might get one caliper with a new housing and another with a factory dayton housing. most reman ones i have used and seen are interchangeable for left and right so you can put the bleeder on the inside or outside.
 
1 - 1 of 1 Posts
Top