Pirate 4x4 banner

1 - 3 of 3 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter · #1 ·
i need springs. my stocks are shot. what are yall using for front and rears on your 800. rs front. dont care to extend the frame. some thing that will ride decent and flex good. and a cheap junkyard find kinda deal. if nothing else i think i may use s2 fronts all the way around, but they may not be the best thing for the rear.
 

·
Granite Guru
Joined
·
3,288 Posts
Jeep wrangler lift springs. I have pro comp 4" if I were to do it over I would get BDS 2.5" lift springs because they have military wrap eyes and I want less lift. About $60 per spring.
 

·
Registered
Joined
·
125 Posts
Springs

I have used SII front springs for the front of the 80. They are about 2-3" longer and flex great. They would be too short for the rear in my opinion. The stock rear 80 springs are about 46" the SII fronts are I think about 40" I have used Rancho 44044 ( jeep j-truck/wagoneer) they match well with the stock SII fronts. Remove one leaf keep the hangers in the same location. Upgrade to 2 1/2" hangers. Flex great SOA clears 35's easily and 37's with some trimming.
 
1 - 3 of 3 Posts
Top