Pirate 4x4 banner

1 - 10 of 10 Posts

·
Premium Member
Joined
·
30 Posts
Discussion Starter #1
Whats up everyone starting a build post so can get some ideas and feedback for my build. I made a lot of mistakes in the process so if anyone has any questions post it up maybe ive dealt with it. This is going to be a long one so bare with me. I got it stock and beat up gross polluter broken spring shocks the works. Here in california was seemingly a death sentence. Was able to replace tps the non seating valves and broken timing chain and was semi good to go. Im going to post pics out of order with description of the mods being done so its easy to quote for help or feedback.
 

·
Premium Member
Joined
·
30 Posts
Discussion Starter #2 (Edited)
Heres one of the earliest pictures on this phone. I believe I was fixing my Chevy leaf conversion. And bobbing the bed at the time. So my measurement was 1/4 inch off and the angle on my rear axle was off so I eventually fixed it. I'm usinv the missing link shackles in the rear slightly mpdifies and love them. I'm going to skip through a bounch of mods but will touch on them slightly so stop me if there's a question or comment.
 

Attachments

·
Premium Member
Joined
·
30 Posts
Discussion Starter #5 (Edited)
Ok bent my front axle jumping it and swappeda rock assault in. With some chromos. Love them. Also took the down time as a chance to run dual cases. With some homebrew triple sticks. I also put in some s10 seats may more comfy and just overall awesome.
 

Attachments

·
Premium Member
Joined
·
30 Posts
Discussion Starter #7
:laughing:

Pull that thing forward! there's 6" of trailer deck left.
Lol my first time towing. This truck had only been towed 2 times under my ownership. I try to drive it to and from the trail. And the tacoma in front did not pop a wheelie.
 

·
Premium Member
Joined
·
30 Posts
Discussion Starter #8
Ok so flatbed and exo basically get us up to date.small things were missed if you have a question ask. Cage is 1.75 dom 1/8 wall. Painted orange Winch plate made from c channel and square stock hangers and plate made from random scrap around.
 

Attachments

·
Premium Member
Joined
·
30 Posts
Discussion Starter #9
Ok heres some random stuff. Made a center console custom e brake setup changed my cam to 261. I also put a Detroit in the front recently. Changed the seats to fancy racing seats with harnesses. I'm about to add some more hitches so I can move my winch in a better location and mount a flag.
 

Attachments

·
Premium Member
Joined
·
30 Posts
Discussion Starter #10
Heres a few pictures of my new hitches and winch storage area. One reciever will be for a flag the other is winch storage and the bumper one is to mount the winch in the rear when necessary. If I were less lazy I wouldve made my winch storage in a better area. When i roll it will take damage. So when i do dumb stuff I'll say hold my winch instead of hold my beer.
 

Attachments

1 - 10 of 10 Posts
Top