Pirate 4x4 banner

1 - 4 of 4 Posts

·
Registered
Joined
·
779 Posts
Discussion Starter #1
Quick question,
What is the ID of the front and rear eyes on the rear leaf springs on the 89 to 95 series trucks? None in local wrecking yards so need to ask.
Thanks
 

·
Registered
Joined
·
3,444 Posts
18mm x 150mm I believe. Sometimes 3/4" will work. If it has the metal sleeve I am not sure of that bolt size.
 

·
Registered
Joined
·
779 Posts
Discussion Starter #3
JamisonWorkshop said:
18mm x 150mm I believe. Sometimes 3/4" will work. If it has the metal sleeve I am not sure of that bolt size.
This is on my 7s truck custom rear springs. Looking for the actual urethane / rubber bushing OD size. The 84 to 88 are too small - trying to see if the 89+ are larger in diameter.
 

·
H M F
Joined
·
4,364 Posts
Hard to say for sure when it's dark and they're mounted on the truck. Pesky shackles are always getting in the way.

Looks right around 1 3/4 inches.
 
1 - 4 of 4 Posts
Top