Pirate 4x4 banner

1 - 7 of 7 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
Hey folks Im new here and Ive only posted once here. I bought a 91XJ with a 3 inch lift, 33 inch BF Goodrich MT KA2s. I have had some issues with the Tcase linkage. If I pop it in 4hi and go back to 2wd the linkage will sometimes pop out of place. i know i need pics but im at work right now and trying to figure out what i need to order or repair to fix the issue. I can take vice grips, channel locks or something of that nature to press it back, but it gets kinda old. also this is 5Spd with a NP231 Tcase.
 

·
Registered
Joined
·
183 Posts
Hey folks Im new here and Ive only posted once here. I bought a 91XJ with a 3 inch lift, 33 inch BF Goodrich MT KA2s. I have had some issues with the Tcase linkage. If I pop it in 4hi and go back to 2wd the linkage will sometimes pop out of place. i know i need pics but im at work right now and trying to figure out what i need to order or repair to fix the issue. I can take vice grips, channel locks or something of that nature to press it back, but it gets kinda old. also this is 5Spd with a NP231 Tcase.
where is the linkage poping out? does it have a tcase drop?
 

·
Registered
Joined
·
10 Posts
Discussion Starter #3
I do have a two inch drop. the previous owner put some Aircraft aluminum blocks in place as a drop. the arm that goes from the tcase and connects to a long silver arm coming from the shift handle. if that makes any sense?
 

·
Registered
Joined
·
10 Posts
Discussion Starter #7
i like the novak kit it seems pretty straight forward, but im looking to fix what i got now before i throw some dough at it.
 
1 - 7 of 7 Posts
Top