Pirate 4x4 banner
1 - 3 of 3 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi, new to the board but not the Sammy. I am in need of an exhaust system.
I've been trying to get the frozen bolts loose from the catalytic converter to the manifold but of course with no success. Any suggestions? I thought my next step would be to replace the entire system. Could take it to a garage but before we moved, my garage wanted $200 for a catalytic converter and that didn't include labor. I'm somewhat mechanically inclined.
Thanks in advance.
 

· Registered
Joined
·
3 Posts
Discussion Starter · #4 ·
Just got back from vacation and I wanted to thank you for replying to my post. By torch I am assuming you are refering to a welding torch? If so, then I have to find an alternative approach. Once again thank you for your reply.
 

· Registered
Joined
·
3 Posts
Discussion Starter · #5 ·
The weld did break but I just might as well put a new system on it. Muffler is still good but where they clamped the pipe to the holder sprung a leak. The pipes are just giving way and the bolts refuse to budge. Thanks.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top