Pirate 4x4 banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,375 Posts
Discussion Starter #1 (Edited)
READY TO BE MADE INTO A TRUGGY!!

Have a cab/frame/title for a 94 Toyota Extra Cab truck. Cab is in great shape, interior has been gutted and all inner sheet metal has been removed to build a nice tight fitting cage that will not waste space.

$500 can deliver a resonable distance within Coloado.

Here is a picture from when it had an engine...the front suspension is not included for this price there are now 4 "stilts" with casters mounted to the frame to allow it to roll around very easily....

http://i86.photobucket.com/albums/k112/Okiyota/Prerunner Parts/00868.jpg
 

·
Registered
Joined
·
1,375 Posts
Discussion Starter #2
As of right now the interior is sold, if the guy flakes and doesnt show i will update.

Also, forgot to mention, the floorboard in the extracab area has been cut out to tie the cage that never happened into the frame, it was cut out properly with a plasma cutter and ground down smooth so it looks nice. I left enough edge on the rear and sides so a new floor could be made and welded/rivited/glued/taped or whatever else you could think of.
 

·
Get Out
Joined
·
248 Posts
Steering Shaft

Looking for a steering shaft out of and IFS truck with tilt steering. Have one of those I could buy from you? If so please PM
 
1 - 3 of 3 Posts
Top