Pirate 4x4 banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,180 Posts
While the truck is still on the ground unbolt the half shaft from the Diff. Then raise the truck up, disassemble the hub and unbolt the upper ball joint from the upper control arm. Depending on how long your break lines are you may have to remove your caliper too. Remove the shock and pull the CV out. Then reassemble.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top