Pirate 4x4 banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1 (Edited)
So I have been stalking the site the last 2 days and I cant quite find what i need~ I have a 88 4runner that was a 3.0 with an auto. Swapped in a 3.4 from a '98 T100 and got a 5 speed r150 from a 91 donor. I am all back together and elbow deep in wiring. I am at a loss as to where to connect my clutch switch (the one connected to the clutch pedal). Anyone do a toyota auto to 5 speed swap in a 1st or 2nd gen know where the wires from the pedal need to go to? Some guys are saying go to the black wires for the neutral cancel on the main plug from the a340. some guys said take it back to the ECU; I also have that mess of wires from the auto ecu that sits just in-front of the shifter (in the cab) any guidance would be appreciated.
 
1 - 1 of 1 Posts
Top