Pirate 4x4 banner
1 - 1 of 1 Posts

·
Wicked Raciest !
Joined
·
17,737 Posts
Originally posted by 90toy:
<STRONG>when you weld the shakle hanger tube, is it a 1/4" out from the back side or front (facing the side of the truck) thanks,
patrick
<IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/usa.gif" border="0"></STRONG>
What part do you not understand;
Taken from AP site;
The tubes should be placed so that the are offset to the outside of the frame by 1/4". Tack weld the tubes in place for now. 

<IMG SRC="smilies/usa.gif" border="0"> <IMG SRC="smilies/usa.gif" border="0"> <IMG SRC="smilies/usa.gif" border="0"> <IMG SRC="smilies/usa.gif" border="0">
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top