Pirate 4x4 banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,464 Posts
sorry, don't have a digital camera-

I split the SAS crossmember at the center and welded in the receiver using gussets on front and back. also welded in plates to join the stock cross member to the SAS bar.

Seems really solid, I plan on buying a used 8 to 9 thousand lb rated winch and making my own detachable receiver mounts
 

·
Registered
Joined
·
4,320 Posts
I did this set up on my smittybuilt, you can see how its braced by the mounts I made for it, works super & very strong!! This is an 85 4 runner, I had this same bumper on my 88 P\U also.
<IMG width=560 height=420 SRC="http://www.pirate4x4.com/ubb/uploads/Bumper.jpg">
Another view. Note the Pirate cleanup plaque!
Makes my 4runner look better!
<IMG width=560 height=420 SRC="http://www.pirate4x4.com/ubb/uploads/Bumper2.jpg">

[ 10-22-2001: Message edited by: 5spd ]
 
1 - 5 of 5 Posts
Top