Pirate 4x4 banner

1 - 6 of 6 Posts

·
Registered
Joined
·
460 Posts
Discussion Starter #1
<IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0"> Had mine welded up by a buddies dad, he just welded the 8 corners of the spider gears, and the welds ended up seperating from the gears. Guess they need to be welded to the carrier also. So does anybody who has had good luck with these things staying together want to help me out, for some <IMG SRC="smilies/beer.gif" border="0"> , or reasonable price. <IMG SRC="smilies/rolleyes.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">
Thanks a lot,
Eric
 

·
Registered
Joined
·
311 Posts
If your carrier is bare and clean I'll do it for a $20 spot. I'v done a few for my broke ass friends and they've held up great. <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
460 Posts
Discussion Starter #5
Originally posted by wes:
<STRONG>If your carrier is bare and clean I'll do it for a $20 spot. I'v done a few for my broke ass friends and they've held up great. <IMG SRC="smilies/biggrin.gif" border="0"></STRONG>
Sounds good, e-mail me your #, and a good time to call. <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
4,036 Posts
The best method I've seen is to take a peice of plate steel that fits just inside the 4 gears and weld all the gears to that, its alot easier then going to the carrier and you can put down some nice long beads
 
1 - 6 of 6 Posts
Top