Pirate 4x4 banner

1 - 5 of 5 Posts

·
Registered
Joined
·
287 Posts
Discussion Starter #1
So I'm wondering how to run my ARBs off of a York.

What switching/relays/valving is this gonna take?

I wanna be able to switch the ARBs on and have the compressor cycle when it needs to, but still have a manual switch to fill tires, run tools, etc...

Anyone done it?
 

·
Registered
Joined
·
789 Posts
go to onboard air they have some good tanks with a few ports, pic one for your arb put a filter & regulator & switch on that line. the tank will collect oil too
 

·
Registered
Joined
·
1,328 Posts
All I did was hook up the OBA like one would normally, then I 'T'd" off the tank and ran manual toggle switch to activate the locker. I also installed a regulator on that line and regulated my pressure to 90 psi. Got everything from McMaster-Carr online.
http://www.mcmaster.com

Part Number: 62475K24 for the toggle switch.
 
1 - 5 of 5 Posts
Top