Pirate 4x4 banner
1 - 3 of 3 Posts

·
Registered
Joined
·
212 Posts
Discussion Starter · #1 ·
Just some info, I set up my arbs this morning and I didn't have the setup like ARB uses to test mine for leaks so I found out that an air gun, with a little teflon tape set to 90 psi, threads on to the arb fitting:D Works great and its free.
;)

Steve
 

·
Registered
Joined
·
103 Posts
don’t forget to rout that copper air line, mine deformed into the gears and locker assy. i put mine in the front with hi pinion.

just some info in case you miss it


mba:D
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top