Pirate 4x4 banner
1 - 1 of 1 Posts

· Registered
24 Posts
Go and get a 8mm helicoil kit. I believe it has a 1.5 pitch. Take the good bolt with you to match it up. The kit comes with the tap that you need. The drill bit size is printed on the package. Just drill slow and straight! Piece of cake. If you are afraid to drill and tap it, any auto shop or machine shop will be more than happy to help.. Good Luck!
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.