Pirate 4x4 banner
1 - 3 of 3 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter · #1 ·
Well Crap,

I just got done rebuilding my AW4 and installing it back in the Jeep. My problem now is that I don't seem to have a Neutral or a Reverse! The shaft stops turning in Reverse but it won't go backwards. Does anyone have any ideas as to what is wrong or things I could check?

Thanks
Dean
 

·
Registered
Joined
·
28 Posts
Discussion Starter · #3 ·
Yea, No neutral


If you put the shifter in N the output continues to spin like it's in 4th gear. I've tried to stop it with my hand thinking it was free spinning but its not.

Dean
 

·
Registered
Joined
·
28 Posts
Discussion Starter · #5 ·
No, I did'nt do the air checks when I was putting it together. Although I'll probably wish that I did. I haven't installed the driveline yet so far I'm just watching the output on the T case. However if you use the shifter to run through the D-3 & 1,2 slots the shaft slows down in the lower holes so at least the thing seems to be shifting.
 
1 - 3 of 3 Posts
Top