Pirate 4x4 banner
1 - 2 of 2 Posts

·
Registered
Joined
·
11,645 Posts
jeepfreek383 said:
my next step is to take off the front calipers and hold them so the bleeder is straight up and try bleeding them that wayi may have put them on at the wrong angle.. right now the bleeders are pointing towards the back of the vehicle as apposed to pointing at the floor boards..maybe i still have a little air trapped in there...thanks
If that's how you mounted them, you have a lot of air trapped in the calipers. They are supposed to be mounted with the bleeders facing up unless you like removing the calipers to bleed them ;)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top