Pirate 4x4 banner
1 - 11 of 11 Posts

·
Registered
Joined
·
271 Posts
Discussion Starter · #1 · (Edited)
Whats the best system to use with a dana 60 in the rear locked with 38s and a 350? I know Sam's makes a good one but it would have to be mounted on one of the sides of the pumpkin... so wouldn't that limit the flex more? What about a two or four link system?
 

·
Registered
Joined
·
217 Posts
I bought the Parts Mike anti wrap bar. I haven't installed it yet, but it is not supposed to limit you that much and it was a whole lot cheaper. (if that matters to ya!)Good quality parts.
<IMG SRC="smilies/glasses.gif" border="0">
 

·
Registered
Joined
·
60 Posts
What other places sell Anti Wrap bars? Do any of you have pictures of your set up that I can take a look at?

Thanks,
 

·
Registered
Joined
·
767 Posts
TJ said:
I bought the Parts Mike anti wrap bar. I haven't installed it yet, but it is not supposed to limit you that much and it was a whole lot cheaper. (if that matters to ya!)Good quality parts.
<IMG SRC="smilies/glasses.gif" border="0">
I didn't think PM was still selling them, I'd be interested in knowing what you think of the bar once you have it installed.
 

·
Registered
Joined
·
231 Posts
When you guys have mounted the sam's style bar have you set it up at the crossmember with the bar above or below the mount?

Every pic I see it is always vert, but some up and some down. What's the diff?

I would think mounting it above gives the bar a chance to drop and move back when the axle droops, but I can't see that happening when the bar is under. Maybe I am not thinking clearly.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top