Hey guys, hopefully this can help someone finish a project. This is my collection of parts for a 3 link front and 4 link rear suspension on a 78 FJ40 landcruiser, using 05+ Ford D60 and sterling 10.5" rear. Covid happened, we moved and I ended up selling my cruiser, so the project is no more.
I did my best to order the correct parts but could of made mistakes. Please look closely and ask questions.

I'm asking $1800 Shipped in Crypto, cash, check, PayPal or venmo .
If you add this all to the cart on Ballistic and Ruffstuff's page it Totals over $3800 without shipping and many out of stock.
All these parts are from Ballistic Fabrication and a few from Ruffstuff Specialties.
Did my best to get a list with sku #'s, quantity and pics below. The last pic with stock images was for the brackets since they are all wrapped up and doesn't show everything listed below.

  • 8x BJ-675-28BF -Forged Chromoly 2.63 in Ballistic Joint - 5/8" / 1.25"-12tpi / Left Hand
  • 8x BJ-675-27BF -Forged Chromoly 2.63 in Ballistic Joint - 5/8" / 1.25"-12tpi / Right Hand
  • 8x BJ-670-1 -2.63 IN HEAVY DUTY BALLISTIC JOINT
  • 4x BJ-673-1 -Ballistic Joint Rebuild Kit (2.63" OR 3.0") - 2.63 in HD Ballistic Joint
  • 1x BJ-672 -Spanner Tool for Ballistic Joints - 2.63' Ballistic Joint
  • 1x BRK-1048-2 -Frame Mount Ballistic Joint / Bushing - 3.0'' (sold as a pair / each side of frame)
  • 4x SAF-680 -303 Stainless Steel Safety Washer - 5/8 in
  • 2x SPA-554 -303 SS Spacer 5/8 in.
  • 8x JAM-719 -Jam Nut - Right Hand Thread / 1.25"-12 tpi
  • 4x JAM-713 -Jam Nut - Right Hand Thread / 7/8"-18 tpi
  • 2x MISC-616 -I.D. Tube Clamp - 1.25"-1.5"
  • 1x BRK-1013-1 -Dana 60 King Pin - Coil Over / Shock Mount And Gusset – Ford
  • 6x BRK-1075-4 -HD Flat Bottom Shock Tabs
  • 4x BRK-1074-5 -HD Link Tabs For Round Tube - Medium / 1.5"
  • 4x BRK-1074-4 -HD Link Tabs For Round Tube - Short / 1.5"
  • 1x RBK-1004-05 -Adjustable 3-Link Tower - 3.25 / 2.63
  • 1x BRK-1055-6 -Adjustable Panhard / Tracbar Frame Mount - 2.0" Mounting width with 9/16" hole
  • 1x RBK-1002-15 -Adjustable Offset Panhard/Tracbar Axle Mount - 3.25''
  • 1x BRK-1040-1 -Inner Frame Mount 0 degree offset - 2.63" Width - 9/16" Bolt Hole
  • 4x BRK-1080-7 -Axle Tube LINK Tabs - 3.5 in
  • 4x BRK-1080-4 -Axle Tube LINK Tabs - 3.0 in
  • 2x BRK-1062 -Adjustable Inner Frame Bracket / Lower Frame - 22.5 degree
  • 2x -Ruffstuff DOM Sleeved Bushing Kits 2.75" weldable. 2 pairs
  • 1x -Ruffstuff Gusset kit
  • 3x -Ruffstuff ¾ inch heim joints 2 rights and a left.
  • 1x -Ruffstuff Trick Tabs for zip tying brake lines and other
  • 1x -Ruffstuff FJ40 front axle centering tool.