Pirate 4x4 banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6,531 Posts
Discussion Starter #1
pulled my front 44 apart today to r and r it since i have the whole jeep apart at the moment...and i came across something that i wasnt expecting..pulled the DS shaft of the housing, and noticed that the base of the yoke on the inner shaft was rubbing on the axle tube a bit...

possible bent housing? ill try and get some pics up shortly...but it is after midnight and im fawkin tired. anyone got any guesses?
 

·
Registered
Joined
·
175 Posts
My guess would be a bent housing... Same thing happend to me with my d44 at the time I didnt have enough to buy a d60 :shaking: so I put the shaft back in and ran it till it snaped. Lasted longer than I thought:D. Take a square and set it on the axle tube to see if its bent. Worked for me.
 

·
Registered
Joined
·
6,531 Posts
Discussion Starter #3
so ya...trump this to being a tired dumbass....it was late when i got the shaft pulled out of the housing...and didnt realize i was missing the snap ring on the stub....so ya...housing is fine...thank god:laughing:
 
1 - 3 of 3 Posts
Top