Pirate 4x4 banner
1 - 7 of 7 Posts

· Registered
Joined
·
25,334 Posts
Discussion Starter · #1 ·
I picked upa new soft top today, for what I felt was a fair price. I got home and started to put it on and found some small pieces missing like the bow couplers and windshield mounting brackets. I got to thinking about just modifying the cage to hold the top up. Has anyone had any real luck with this, or should I just track down the pieces and follow the instructions. Pictures or just ideas if you've got them please
 

· Registered
Joined
·
25,334 Posts
Discussion Starter · #3 ·
Thanks, that's pretty much what I've decided for now, considering the season. If I got it to fit nice and tight now, it would be loose as hell in the summer. I've got some tubing I can turn down or bore to use for the sleeves and the windshield bracket looks easy enough to fab up too. I will tackle the cage this summer, if anyone has done this, I wouldn't mind seeing some pics.
 

· Registered
Joined
·
25,334 Posts
Discussion Starter · #5 ·
I keep hearing about those pakistani tops...got a picture? I was going to run my bikini top and half doors this winter until I found this top. I'm too skeered to mess up my hard top.
 

· Registered
Joined
·
25,334 Posts
Discussion Starter · #7 ·
Yeah, It will be easy enough to bend up some stuff for the front part that ties into the windshield and will catch the door seal. My concern with building the back part of the cage now is that it hasn't been getting much out of the 40's lately and I know the top would be pretty loose when it warms up.
 

· Registered
Joined
·
25,334 Posts
Discussion Starter · #9 ·
I'm missing the windshield mount brackets and the couplers for the bows. Probably easy enough to make but if you've got some let me know what you want for them to get them on their way.
 

· Registered
Joined
·
25,334 Posts
Discussion Starter · #13 ·
So the L shaped brackets thatt screw on the windshield are for the hard top as well? As far as I know my hardtop hasn't been on the cruiser since it was painted 8 years ago and the brackets are MIA. I'll check the fit on the EMT, I'm guessing it would be 3/4"? I've got the top in my living room right now, no warm sunny days in the forecast for a while.
 

· Registered
Joined
·
25,334 Posts
Discussion Starter · #15 ·
Thanks, I found out the bows are made from 3/4" EMT. I bought 4 EMT couplers and a foot of EMT and was able to join the bows together. I made the windshield brackets out of some angle I had. Now I just need to track down some more stainless snaps, or should I not waste my time and go with the turn-locks? I think I may hit the turn-locks on rocks in the summer and rip them off, are the snaps that bad?

Plowboy, I'll take the pices I'm missing, if you don't mind. The coupler pieces and the windshield brackets.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top