[Monte Busselman]

I need the bolt size for the spindle bolts, and the size for the bolts for the manual disconnect hubs, the ones that bolt to the hub and the ones that bolt the two halves together. All solid axle stuff.

Thanks, Monte

 

[Monte Busselman]

Gawdammit (Cartman voice) I just paid $66 for 18 fawking cone washers and I'm not giving up $3.80 each for 12 spindle bolts, now what fawking size are they!!!!! (more Cartman voice)

 

[4RnrRick]

Go spend $3 on a thread pitch tool and just measure them off the parts. all I remember is they are small.

 

[budr]

Just to keep the guessing to a minimum, most Toyota bolts are either 1.25 or 1.50 pitch. If it is a common size in the hardware store, it is wrong, you need the finer pitch! Usually...