Pirate 4x4 banner
1 - 7 of 7 Posts

·
Registered
Joined
·
5,454 Posts
2 small square tube pieces welded in, open ends perpendicular to the fuel line direction. cut a piece of pvc that was slightly longer than the pump, took a 1/2 inch piece out of it's length. wrapped the fuel pump in the foam insulator it came with, put it in the pvc and hose clamped the whole thing to the 2 square tubes. it forms more of a compression wrap on the whole pump instead of just clamping 2 spots.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top