Pirate 4x4 banner
1 - 1 of 8 Posts

· Registered
2,360 Posts
Well, Toyota fittings are 10mmx1.0. Check what the fittings are that came with your prop valve and lock. Chances are with the prop valve is that the ports in valve are 1/4" NPT female (pipe thread). Wilwood valves come with 1/4" NPT male to 3/8" female adapters. You'll either need to find 10mmx1.0 female to 3/8" standard fitting adapters or remove the 10mmx1.0 fitting and reflare the line with a male 3/8" fitting. Since I'm not aware of the adapter, I'm doing the later. I'm not familiar with the line lock so I can't comment.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.