Pirate 4x4 banner
1 - 4 of 4 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter · #1 ·
Did you braked the pads in before you went driving normaly.To brake in new pads you go out and do some easy stops first then hard stops 4or 5 times.It sounds to me that you have burnt your new pads take them out and give them a bit of a grind to remove the surface put them back in & brake them in hope this helps
<IMG SRC="smilies/smile.gif" border="0">
 

·
Registered
Joined
·
1,081 Posts
When you want to reply to someone else's post, click on REPLY at the top right, not post....
 

·
Registered
Joined
·
30 Posts
Discussion Starter · #3 ·
Yea sorry about that didn't know I had done it till I posted it on the board <IMG SRC="smilies/frown.gif" border="0"> Still get it right this time I hope. <IMG SRC="smilies/smile.gif" border="0"> <IMG SRC="smilies/wink.gif" border="0">
 

·
Registered
Joined
·
1,076 Posts
yeah, i did some (10 or so) easy stops before driving normal on the pads, and a few harder stops..im gonna get some anti squeek stuff and put those shims in between the pad and caliper..thanks though
 
1 - 4 of 4 Posts
Top