Pirate 4x4 banner
1 - 7 of 7 Posts

·
Registered
Joined
·
1,000 Posts
are you planning on building the cage yourself or paying someone to do it for you? IMO body lifts suck get the sawzall out stock ride height and cut the fenders with the saw you can stick 35's on it with ease I've done it to, two FS bronco's one of which is a 86 put the tires on even before I got happy with the saw the rubbed a lil bit then none at all.
 

·
3d Artist for Hire!
Joined
·
19,324 Posts
You might try searching in this forum. I know there's someone on here that did a roll cage for his bronco. Don't know if that thread has been deleted yet or not....
 

·
Registered
Joined
·
25 Posts
Discussion Starter · #7 ·
i could do some of the work but i need a plan drawing with measurements being as i have no idea what to measure so i guess i am askin if anybody else has an 86 bronco with a full cage or even if the know of anybody that makes one like smittybilt
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top