Pirate 4x4 banner
1 - 1 of 1 Posts

· Registered
Joined
·
253 Posts
For the 85' all the holes should already be in the frame. Just torch out all the stock rivets bolt the 4wd stuff in, that includes the whole crossmember setup. Either change the steering box or run a cross over. It's a lot of work, but not more than changing the whole frame.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top