Pirate 4x4 banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,834 Posts
2wd pan is shallow, 1-1.5 deep and totally flat. 4wd pan has an additional inch or so "sump" that runs side to side across the middle of the pan.
Why do you need a thicker material?? I have always welded in my own drain setups on the stock pans- use a stich technique to keep from blowing on through.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top