Pirate 4x4 banner
1 - 7 of 7 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter · #1 ·
i have 8inch shacles in the back and i know i can make it fit there but im wonder ing can i fit them in the front with slight torsion adjstment without them rubbing?
will a 1 inch ody lift make this possible and while ive got some of you experts reading this are these tires decent for this amount 137$ they are bridgestone dueler m/t d673 with uni-t
<IMG SRC="smilies/question.gif" border="0">
 

·
Registered
Joined
·
3,010 Posts
they could rub without the torsion lift.
my freid has 31's and he rubs. no lift. and a body lift would help too.

just get ride of that ifs and go straight!
<IMG SRC="smilies/rolleyes.gif" border="0"> <IMG SRC="smilies/glasses.gif" border="0"> <IMG SRC="smilies/grinpimp.gif" border="0">
 

·
Premium Member
Joined
·
30,413 Posts
hell yes they will fit! just get out the sawzall and cut your fenders.

btw i shreded 4 of those tires in one day on a brand new truck. they suck. i swear the sidewalls are made out of seran wrap.
 

·
Registered
Joined
·
165 Posts
Well I have a '92 4WD Pickup and I put 33x12.5r15 BFG Mudders on there with no lift and just fiberglass front fenders and they did not rub that much at all. And if you have that much lift in the back I dont think you will have a problem. Just throw some fiberglass fenders on there, they are like $250-300

[ 08-20-2001: Message edited by: Fishy ]
 

·
Registered
Joined
·
343 Posts
Good year MTRs are $149 at tirerack.com for that size.

35x12.50s are only a $156 (I just ordered a set of these). <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top