Pirate 4x4 banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,717 Posts
yoyota said:
Ok, I have sold some fj40 parts on ebay, and I am currently trying to seperate the 4 speed transmission and transfer case. I have all bolts holding it together removed, the bolt and washer on the output shaft removed, and i can get it to seperate about 3/4" but it wont pull completely apart. I have tried to wooden wedges between the gap, but it wont come apart. Is it the bearing on the output shaft that is holding it in? Any help would be greatly appreciated.
Try this
 

Attachments

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top