[splatt]

my head on my 85 efi is crap, blew a gasket again. passages corroded, milling wouldnt help, will a head off a celica fit without problems, i don't see were there would be a problem since they are both 22re motors, just woundering if any one has done it. can get lift spring or 5.29s or lockers until it runs again, already got the celica head and gaskets
thanks,
matt <IMG SRC="smilies/question.gif" border="0"> <IMG SRC="smilies/question.gif" border="0"> <IMG SRC="smilies/question.gif" border="0">

 

[miniyota]

i don't see why not.

the only thing that may be different is the cam and may be the bolt holes.

i would call toyota and see if they know what i the difference is thou! <IMG SRC="smilies/biggrin.gif" border="0">

 

[Brandon]

I used a celica block so it should work <IMG SRC="smilies/smile.gif" border="0">

 

[Randy]

84 and earlyer are big voluim heads whith domed pistions. after that thay went to a low er head voluim and flat top pistons. thay dont inter change.